球探足球比分直播

SD-380 interface agent specially for the extruded sheet

  I.Brief introduction
  This product is the anion-type latex made up of acrylic ester, nitrile and maleate, as well as the special functional single bodies after the special technique – self crosslinking. It can resist the acid and alkaline, and has the good primary cohesion force and penetrability for the extruded sheets, it also has very strong adhesiveness and water resistance. It can also be used in the heat preservation mortar and can increase the loading, adhesion, antiflex and anti-pressure of the mortar.

  II. Technical indexes
 

Item

Index

Outlook

Light yellow liquid

球探足球比分直播Status in the container

No blocks

球探足球比分直播Features in construction

球探足球比分直播No obstacles in painting

Stretching and cohesion intensity (with XPS board)  Mpa

≥0.10, or the XPS board is destroyed

Storage stability in low temperature

球探足球比分直播No variation for 4 hours when freezing under -5℃, no difficulties in painting

  III. Matching method
  The method of matching the heat-preservation mortar: the matching ratio of emulsion, water and cement is 1.5:3.5:5 (concentration type) and 2:3:5 (common type).
球探足球比分直播   The actual matching proportion can be adjusted according to the actual demands of the customers.

  IV. Package and storage
  The package is the plastic barrel of 50 kg, iron barrel with 200kg with the plastic inside lining or customized on the request of the customers.
  The product should be stored in the room with the temperature of 5 - 35℃. The direct sunlight and the explosion in the air for long time should be avoided, or the water will be vaporized and there will be skinning. The time length for storage is normally half year.
  V. Security
  This product is not toxic, corrosive, flammable, it belongs to the non-dangerous goods