球探足球比分直播

SD-518 elastic modification latex for cement

  I.Brief introduction
  This product is the anion type latex made up of the single bodies of ethyl acrylate, acrylonitrile, dibutyle maleate, as well as many kinds of special agents after the special technique of polymerization. It can resist the strong acid and alkaline, and can also increase the cohesive strength and waterproofness of the cement. It can be used for the painting of external and internal cement walls, so as to prevent the cracks and water seepage and increase the fastness of the walls and the bearing strength of the entire building, it can also be used to make the cement elastic sealing compound with high performance.
  II. Technical indexes
 

Item

Index

Item

Index

Outlook

Milkwhite liquid with blue light

Solidity (wt%)

50±1

Vitrification point (Tg)

-20℃

Viscosity (mpa.s)

500-1000

Ph Value

7.5 – 9.0

球探足球比分直播Residue monomer (Br value%)

≤ 1.0

球探足球比分直播Dilution stability

球探足球比分直播Pass 20% water solution

Chemical stability (5% calcium chloride)

球探足球比分直播1:2, no flocculation and other deformation

Mechanical stability

Pass 6000 r/min for 30 minutes

Unit extension

4 - 54

  III. Package and storage
  The package is the plastic barrel of 50 kg, iron barrel with 200kg with the plastic inside lining or customized on the request of the customers.
  The product should be stored in the room with the temperature of 5 - 35℃. The direct sunlight and the explosion in the air for long time should be avoided, or the water will be vaporized and there will be skinning. The time length for storage is normally half year.
  IV. Security
  This product is not toxic, corrosive, flammable, it belongs to the non-dangerous goods