球探足球比分直播

SD-568 fluoroacrylic latex

  I.Brief introduction
  This product is the watery anion latex made up of the single bodies of the acrylic ester as well as many kinds of the functional single bodies and fluorine single body after polymerization. Because of the existence of the fluorine single body, it has not only the features which are commonly possessed by the acrylic acidic latex, but also the features such as acid and alkaline resistance, salt mist resistance, efflorescence resistance, high resistance of weather variation, hydrophobe, oilphobe, etc. Therefore, it is suitable to be used in the preparation of the emulsion varnish, fluorocarbon lacquer, metal lacquer with high gloss of the high standards. It belongs to the environment protective product.
  II. Technical indexes
 

Item

Index

Item

Index

Outlook

球探足球比分直播Milkwhite liquid with blue light

Solidity (wt%)

49±1

Vitrification point (Tg)

16 -28℃

Viscosity (mpa.s)

500-1500

Ph Value

7.5 – 9.0

Residue monomer (Br value%)

≤ 1.0

Dilution stability

Pass 20% water solution

球探足球比分直播Chemical stability (5% calcium chloride)

球探足球比分直播1:2, no flocculation and other deformation

球探足球比分直播Mechanical stability

Pass 4500 r/min for 30 minutes

freeze thawing stability

Pass after 5 circulation

  III. Package and storage
  The package is the plastic barrel of 50 kg, iron barrel with 200kg with the plastic inside lining or customized on the request of the customers.
  The product should be stored in the room with the temperature of 5 - 35℃. The direct sunlight and the explosion in the air for long time should be avoided, or the water will be vaporized and there will be skinning. The time length for storage is normally half year.
  IV. Security
  This product is not toxic, corrosive, flammable, it belongs to the non-dangerous goods